Version 1.9.4

Release Date: STILL IN BETA Xxxxx nn, 20nn (build nnnn)

Release History

February 27, 2013 (build 1061)
March 16, 2013 (build 1062)
March 19, 2013 (build 1063)
March 25, 2013 (build 1064)
March 28, 2013 (build 1065)
March 30, 2013 (build 1066)
April 07, 2013 (build 1067)
April 09, 2013 (build 1068)(Current Release)

Changes from version 1.9.3:

---

1061

• Initial support for Instromet weather stations. See http://instromet.co.uk/ This has had limited testing so far and is likely to require bug fixes and further enhancement.
• Change row highlight colour on dayfile.txt editor to make more obvious
• Show 'wet bulb' as mouseover on dew point figure on main screen
• Ensure 'today's rain' chart axis always starts at zero
• Don't try to process a standard template file if it's been deleted
• Allow 'EES' for 'ESE' in easyweather.dat to work around bug in someone else's software
• Added logging to debug.log of entries read from easyweather.dat
• Individual 'bad' sensor readings from Fine Offset no longer cause all data to be discarded. Watch out for possible bugs!
• Support for HTTP proxies - completely untested and will probably need further work. Feedback requested!

1062

• Fix 'create missing' bug in dayfile.txt editor when 0900/1000 rollover in use
• Make sure PWS weather responses get logged
• Change Instromet logger interval if changed in Cumulus, not just at start up
• Web tag <#RecentTS>. Takes parameters like the 'recent data' web tags (e.g. <#RecentOutsideTemp>) and gives the timestamp of the data that will be returned for those web tags with the supplied parameters (it may not have the data for the exact time specified). Format can be specified in the usual way with the 'format' parameter.

Example: 
Using the existing tag like this <#RecentOutsideTemp h=1 m=1> will give the nearest available temperature on or after one hour and one minute ago.
The new tag <#RecentTS h=1 m=1> will give the time and date of the nearest available data on or after one hour and one minute ago.

• 'Replaced Comma' versions of the 'recent history' web tags (the others are integers):

<#RCRecentOutsideTemp>
<#RCRecentWindSpeed>
<#RCRecentWindGust>
<#RCRecentWindLatest>
<#RCRecentWindChill>
<#RCRecentDewPoint>
<#RCRecentHeatIndex>
<#RCRecentPressure>
<#RCRecentRainToday>
<#RCRecentUV>

• Select-A-Graph now has units in titles
• Calibration setting for wet bulb temp (when read directly from station)

1063

• Fix thread crash after PWS Weather upload (bug introduced in build 1062)

1064

• Add 'rain since midnight' to monthly log files

(this is for 0900/1000 'rollover' users; normally same as rain today for 'midnight rollover' users)

1065

• Fix 'rain last hour' and 'rain last 24 hours' being slightly too high after a restart, when a rain multiplier greater than 1 is in use
• Fix saving of HTTP proxy settings

1066

• Fix crash caused by another bug in the PWS Weather code change in build 1062

1067

• Write today.ini again after processing Davis logger data, in case rain counter has changed
• Change 'high gust alarm' to use 10-minute max gust instead of 'latest'
• Change edit components used for YTD rain, trans factor, and pressure extremes on stations settings screen
• Change check for Davis firmware for auto VP2SleepInterval to just version 3.00 rather than >= 3.00
• Discard out of sequence Davis logger entries

1068

• Trap exception in WMR200 altimeter pressure calculation caused by bad pressure reading